Technical parameters of gantry automatic palletizer:
Product number MGMD-1800 Gantry palletizer
Palletizing speed 5-20 times / minute
Applicable Products Plastic frame, film package product, carton product, woven bag, barrel
Palletizing height 1800mm
Equipment weight 2500kg
Applicable tray 1 * 1.2m (customized)
Load per layer <= 260KG
Per pallet <= 2000KG
Voltage / Power Three-phase five-wire, AC220V / 50HZ, 12KW, control voltage: DC24V
Model size L4540 × W3300 × H3850
Scope of application film package, bottled water, carton, transit frame, etc.
PLC Siemens
Touch screen Siemens
Photoelectric switch Autonics
Contactor Schneider
Servo motor Delta
Pneumatic components Yadeke
1. Installation environment
Installation location: the buyer's designated location;
Installation location: indoor;
Ambient temperature: 0 oC ~ 40 oC (the equipment needs to be pre-run when it is turned on below zero)
2. Power condition
Power supply: AC 220v
Frequency: 50Hz ± 1%
Protective ground: <10 Ω
3. Compressed air
Pressure: 0.5mpa ~ 0.7mpa
Air consumption: 0.5m3 / min
Temperature: 0 oC ~ 40 oC
4. Equipment configuration instructions:
Human-machine interface (touch screen): Siemens,
Low-voltage devices: Schneider, Omron, Chint
Motor reducer: Deli, S1
Pneumatic components: Yadeke
Servo motor: Delta
Programmable controller (PLC): Siemens
Inverter: Kerun
5. Equipment material description:
stainless steel material is used for the parts in contact with the material; the remaining carbon steel is sprayed with plastic (all stainless steel can be selected)
